此站点大量使用JavaScript。
请在您的浏览器中启用JavaScript。
正式服
PTR
10.2.7
PTR
10.2.6
Beta
Writing a Good Exorsus Raid Tools Note
来自 Durundal
[Last Updated]:
2020/11/17
变更日志
补丁:9.0.2
评分:4.3/5
(
6
投票)
Exorsus Raid Tools
is an addon designed to help raiders with cooldown management, assignments, planning, introspection, and more. One of the most commonly used features is the "notes" tool. Writing notes efficiently and effectively can be harder than it appears at first glance.
Writing notes for Exorsus Raid Tools is surprisingly difficult. Why bother?
Your mythic raid will progress faster
You will be more consistent as a group
You will be able to swap players more quickly
You will have less ambiguity
This guide is meant to serve as a starting point for the sometimes hard to find, sometimes entirely undocumented features and related tools that you can use to quickly and effectively build ERT notes for your guild.
A brief introduction
Download the Exorsus Raid Tools addon using your favorite addon management method
Type `/ert` into chat
Go to the “note” tab on the left of the new screen
Click “add” to create a new note, and “save and send” to share it if you are a raid assist or lead.
Have your raid crew type `/ert note` to enable viewing the note on their side, once they downloaded the addon
Draw silly pictures in the visual note tool and annoy your guildies
Ok, actually writing the thing
If you write a timer like `{time:1:00}` in a note, when you enter combat that timer will start counting down to 0, then grey itself out. You can test your note’s timer by type `/ert note timer` into chat
If you put {H} any text here {/H} it will only be visible to healers. Same for {T} and {D} for the respective obvious roles.
If you are in a group or raid, above the note editor is a list of colored names of the group members. If you click the name, it will insert it into your note. This is helpful in quickly assigning tasks.
If you click the “Other Icons” button, you will see common raid cooldown icons. If you click those, they will be inserted into your note! Helpful in assigning cooldowns.
Tying this into large wigs or dangerous boss modifications
If your guild downloads
https://wago.io/ERT_Note_Timers
and each person enables it to use on shared notes, you can assign by spell ID instead of time. You do this by opening a line of text with the instance of the spell you want to assign, the spell’s ID in ERT specification, and then the players you want to assign. The instance must be surrounded in angle brackets or parenthesis. For example:
<1> {spell:1337} Durundal - {spell:196718}
Would mean that the first time DBM or BigWigs knows that the boss ability with spell id 1337 is approaching, it will put a timer on Durundal’s screen to use darkness. You can know what spell ids are relevant by looking at the source code for either boss mod (
https://github.com/BigWigsMods/BigWigs
or
https://github.com/DeadlyBossMods/DeadlyBossMods
)
In the following example, I have assigned some basic abilities to myself for when Wrathion casts
万物尽焚
. The first three casts are assigned to myself:
<1> {spell:306163} |cffa22fc8Derandal|r {spell:204021}
<2> {spell:306163} |cffa22fc8Derandal|r {spell:212084}
<3> {spell:306163} |cffa22fc8Derandal|r {spell:191427}
Here's how it looks in the fight. On the top row are the normal BigWigs bars, below that is the Weak Aura, and below that is my ERT Note (in reality, I would not keep them this bunched up):
Putting this all together for Nathria
Let’s make a note for Shriekwing, the first boss of Nathria. Starting off, let’s glance at some uploaded logs over at
https://www.warcraftlogs.com/zone/reports?zone=26&boss=2398&difficulty=5&class=Any&spec=Any&keystone=0&kills=2&duration=0
(we’re working on this before release, so the boss could change, but let’s give it a spin)
Under damage taken, we can see there are reliable damage spikes mostly from Reverberating Scream, so let’s assign stuff for that, then we’ll grab Wowhead’s basic notes from
https://www.wowhead.com/guides/shriekwing-castle-nathria-raid-strategy-guide
and leave those as a gentle reminder.
Now, my raid has… Let’s say a MW monk, R Druid, H Pal, and R Sham, leaving us with a few unique CDs to work with, but mostly on a 3 minute CD timer.
The group I saw with a kill in the logs got ~8 Reverberating Screams, so let’s assign that. They happens in sets of 4, with 25 seconds between, starting 10 seconds into the fight, and based on
https://www.wowhead.com/guides/shriekwing-castle-nathria-raid-strategy-guide
it looks like the second phase is likely also on a timer (not phased by % health or a mechanic). Second phase seems to last ~70 seconds according to the logs.
Here’s the note on that so far:
Phase 1
- All players should hide behind the same pillar when Bloodcurdling Shriek is cast.
- Move to the edge of the room when marked with Echolocation.
- Bait the Echoing Screech towards an open area and then dodge the sonic rings the boss shoots out.
{T}- Tanks need to use mitigation for the Exsanguinating Bite and should taunt after each one of these casts.{/T}
{H}
- Healers need to keep the raid healthy when the boss applies Reverberating Scream to the raid.
{time:0:10} {spell:344111} Pally - {spell:31821} (AM)
{time:0:35} {spell:344111} Drood - {spell:740} (Tranq)
{time:1:00} {spell:344111} ShamXP - {spell:98008} (Link)
{time:1:25} {spell:344111} Drood - {spell:33891} (Tree) + ShamXP - {spell:108280} (Tide)
{time:2:35} {spell:344111} Mank - {spell:115310} (Revi)
{time:3:00} {spell:344111} ShamXP - {spell:108280} (Link)
{time:3:25} {spell:344111} Pally - {spell:31821} (AM)
{time:3:50} {spell:344111} Drood - {spell:740} (Tranq)
{/H}
Phase 2
- Stay 13+ yards away from the boss at all times.
- Dodge the sonic rings that are bouncing around the room.
- Use the pillars to create line of sight between you and the boss when she casts Sonar Shriek.
Tada, a nicely formatted ERT note! I’m leaving out the mythic raid abilities, but this is still a start. Write your own dang note for Mythic!
Help, CDs are annoying to plan
I agree. A recent contribution to this has been
https://github.com/j3rrr/ZeroNotes
/
https://www.curseforge.com/wow/addons/zeronotes
, which lets you plug in abilities and their intervals and your raid and it’ll auto assign raid CDs based on a priority list and make sure the timings all make sense. It’s not perfect, but it can be very helpful in bootstrapping an ERT note with cooldowns.
When to not use notes
ERT Notes are great for planning events that multiple people need awareness of, and are fairly static in nature. This often means raidwide survival cooldowns, occasionally movement abilities, and soak or interrupt groups.
ERT Notes are very poor when you need to dynamically respond to events in real time. I would turn to Weak Auras when doing that, although they often take a larger investment if you need a Weak Aura to be synced for multiple raid members.
[Get Wowhead]
高级会员
[$2]
[A Month]
[Enjoy an ad-free experience, unlock premium features, & support the site!]
评论
评论来自
Edfearan
Absolutely love this page. Thanks so much for writing this. However do you know if its possible to display a potion icon in an ert note. It does not show up in other icons and when i enter the spell id manually it does not recognize the spell/item id. Spell it gives me question mark and item it shows nothing.
评论来自
sharnie
How do I enter viserio cooldiwn planning into notes?
评论来自
Spacedots
Can I have multiple spell's assigned for one boss ability? Like lets say Big Raid Ability is going off can I have a note that looks like:
<2> {spell:42069} - Guy1 Rally - Guy 2 Devo - Guy 3 Tranq
Do I just separate them by commas? Or am I forced to do:
<2> {spell:42069} Guy1 - Rally
<2> {spell:42069} Guy2 - Devo
<2> {spell:42069} Guy3 - Tranq
评论来自
DisRuptive1
Anybody know how to hide chunks of text from everybody? Like I know {h}{/h} makes it so the text in between can only be seen by healers or rather is hidden from non-healers. Same with {t}{/t}, the text in between is hidden from non-tanks. What would be the command so no one can see certain text in their notes?
贡献
在发表评论前,请留心以下提示:
您的评论必须为简体中文,否则将会被删除。
不知道如何发评论?参考我们的
格式指南
!
发表前最好先自行校对一次。
有问题可以访问我们的
论坛
来寻求帮助。
发表评论
你没有登录。
请登录
或者
注册账号
来添加你的评论。
使用下面的表格浏览您的截屏。
[Screenshots containing UI elements are generally declined on sight, the same goes for screenshots from the modelviewer or character selection screen.]
质量越高越好!
[Please review our
Screenshot Guidelines
before submitting!]
您没有登录。请
登录
后提交截屏。
将视频URL输入下列表格即可。
URL:
支持:仅限 YouTube
说明:您的视频需通过审核才能在站点上显示。
我们用
Wowhead 客户端
保证数据库的及时更新,向您提供额外的有趣的功能!
两大目的:
它还维护WoW的一个插件
Wowhead Looter
, 在您游戏时采集数据!
它将
采集所得数据
上传至Wowhead,保证数据库时刻掌握最新信息!
您可以用它追踪完成的任务、配方、坐骑、伙伴宠物以及头衔!
您还在等什么?立即
下载客户端
整装待发吧。
我们用 Wowhead 客户端保证数据库的及时更新,向您提供额外的有趣的功能!
两大目的:
您可以用它追踪完成的任务、配方、坐骑、伙伴宠物以及头衔!
您还在等什么?立即 下载客户端 整装待发吧。